Square Cast Iron Gate Sluice Valve / Penstock

• Customization: Available
• Certificate: ISO, Ce
• Transport Package: 1. Inner: Plastic Package2. Outer: Plywood Case
• Model NO.: Square Cast Iron Gate
• Specification: DN300~DN2000
• Trademark: KARFAR
• Origin: China
• Production Capacity: 3000PCS/Month

Product Description

Square Cast Iron Gate SLUICE VALVE


Sluice valve is usually installed in the intake, sink, pond, diversion channel and collecting well of all kinds of waterworks, such as water supply and drainage, water conservancy and flood control etc. It functions to switch flow channel or cut off water flow. Mediums are raw water, clean water or sewage in normal temperature.
Sluice valve has two types,uniaxial compression type and biaxial compression type. uniaxial compression type sluice valve bears a pressure of 0.1 Mpa at upstream face and 0.02 Mpa at inverse face. biaxial compression type bears the same value of 0.1 Mpa at both sides. Rubber seat valve should be opened horizontally.
Classified by material, there are cast iron, cast iron, stainless steel.
Classified by shape, there are round, square and rectangular types.
Classified by sturcture, there are stem rising and non-rising types.
There are also seat ring type and no seat ring type.

Our hot sell products are round cast iron penstock and sqare cast iron penstock.
 

Medium applicable	Water etc.
Main material	CAST IRON, Ductile iron, WCB ETC.
Temperature applicable	≤80ºC
Nominal Pressure	150lb--300lb
Nominal Diameter	DN300--DN2000
Flange Dimension	ASME B16.5, BS4504, ISO2531, ISO7005 and other standards conforming to the requirements
Face to Face Length	API594,BS5155, ISO5752, DIN3352 and other standards conforming to the requirements