Suction Guide /Suction Diffuser (GL46X)
|FOB Price:||US $220 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $220/ Piece|
|Transport Package:||Bubble Plastic Paper + Plywood Case|
|Payment Terms:||L/C, T/T|
- Model NO.: GL46X
- Specification: DN50 ~ DN400
- Trademark: KARFAR
- Origin: China
Working principle: T-type suction diffuser is mainly used and installed at the inlet of pump. It is made up of body, bonnet and a bucket filter, and is outstanding for wide chamber, large filter area, and low pressure lost. The 90 degree design of waterway makes the whole body occupy a small room. In the outlet of valve is built in a straight crisscross type of lattice current plate which equals to a section of rectifier tube. When water flow passes through the filter screen, it receives diffusing action and then gets through the lattice current plate. In the length, the water will become smooth and has less impact on the pump impeller. The cavitation will be limited to the lowest so that the noise and vibration to the pump are degraded, therefore extending the pump life service as a result.
Application: Not only is the T-type suction diffuser applied to installing in the inlet of pump, but it is suitable to other field that the flow media needs to be filtered.
Product design and manufacture complies with GB/T14382-2008 three-way filter for pipe service
Flange end complies with GB/T17241.6,EN1092,ISO7005.2,DIN2501
Pressure test complies with GB/T14382-2008
Main Performance Parameters
|Nominal Pressure (MPa)||1.0||1.6|
|Shell Strength test (MPa)||1.5||2.4|
|Seal test (MPa)||1.25||2|
|Suitable Media||Water, Oil, and Gas|
|Suitable Temperature (ºC)||0~100ºC|
Main Parts List and Materials
|1||Valve Body||GGG50 with epoxy resin, or customized|
|3||Bonnet||GGG50 with epoxy resin|
|4||Screw||Copper alloy, Stainless steel|
|7||Ball Valve||Copper alloy, Stainless steel|
Main Dimensions PN1.0/1.6 MPa
1. Customer Send order list to telephone +86-577-67379225
I. Valve type, face to face length; II. Connection type; III. Norminal Diameter; IV. Medium type and temperture, Pressure range;
V. Material; VI. Actuator
2. After receiving your list, KARFAR will choose Model and give price.
3. Discuss detail request. dlivery time etc
4. Special requests should include in the contract.
We also manufacture as per your request or drawing.
We welcome your comments and inquiries.
company website: http://en.chinaguanlong.net/